ANYONE WITH NEW FUTABA 10C WITH ELCTRIC HELI SETUP

[HeLiJeRseY]

IS IT TRUE THAT WHEN SETTING UP YOUR HELI WITH THE FUTABA 10C RADIO IN THE TX SETTING MENU AND UNDER THAT WHICH THR-REV NOW ITS SET TO NORMAL. I HEARD THAT IF YOU HAVE AND ELECTRIC FOR EXAMPLE TREX 600 EP YOU NEED TO PUT THAT IN REVERSE.

[TX SETTINGS]
THR-REV>NOR    THEY RECOMMEND TO SET IT TO REV WHICH IS REVERSING THE THROTTLE REVERSING

IS THAT TRUE??

[roadrune]

I wouldn't know, sounds strange though... But for the love of god turn off caps. capitol letters are basicly shouting on the internet, and we dont want that

Try and remove the pinion on your motor, then you'll see if it starts up at low hrottle

[HeLiJeRseY]

sorry for the capital letters guys!!

[turbod]

Check out finless 10c videos on helifreak he explains it better than i could.

[sd2602]

From my experiences with my 10C and setting up an esc, the Align esc's especially recognize futaba in reverse. i.e. low stick=full throttle and full stick=no throttle. So yes, in a lot of instances, you need to reverse the throttle channel which isnt a big deal and a cinch to do on the 10C. This isnt just the 10C by they way, I have heard that this is a Futaba thing. Hope this answers your question.